This technique is for when part of a coil zip has come loose from the tape, but the rest of the zip is in good condition. We recommend only using this method if the damage is around 1cm or less in size, if it's larger a full zip replacement might be needed. 

A coil zip is essentially a plastic coil wrapped around a central cord, with that cord needing to be secured to the zip tape - this is where the stitching comes in. 

The snip & staple method is useful when a slider needs to be replaced on a closed ended zip. It is particularly useful for pockets.

The method creates a small cut across the zip, allowing the slider to be threaded on, then uses a staple to close and secure the opening.

A damaged or worn slider doesn't always mean you need to replace the whole zip. If the teeth or coil, zip tape, bottom box and pin are all in good condition, replacing the slider can be a much simpler repair.

Learning how to shorten a zip is one of the first steps in zip replacements, allowing you to bring your gear back to life!

We are huge fans of the humble repair tape patch. They make DIY outdoor gear repair accessible in wild places, outperforming duct, medical, and electrical tape any day. Whether you’re out hiking, trail running, mountain biking, skiing, or on another adventure, they fit nice and snug in a bag or pocket - ready for quick and easy application.

A double-sided heat patch is useful when you need to repair a hole or rip where fabric is missing.

Dirt and body oils can build up over time and cause the down to hold onto moisture which can lead to mould and bacterial growth.

Waterproof clothing needs a good clean every now and then. Dirt, sweat and oils from your skin and the environment build up on the fabric over time.

Over time this seal can start to crack or peel off. But fear not, this can be repaired! Here’s our guide to helping your gear live longer:

Seam sealing stops water from leaking through the tiny holes creating by stitching on waterproofs. The tape is activated with heat and sticks over the stitching to create a waterproof seal. Over time this seam sealing tape can peel away, making the garment less waterproof.