grey-seam-seal-repair-tape-application.jpg
grey-seam-seal-tape-application.jpg
grey-seam-tape-application.jpg
grey-seam-seal-repair-tape-application.jpg
grey-seam-seal-tape-application.jpg
grey-seam-tape-application.jpg

Grey Seam Seal off the Roll - By the meter

from £1.80

Seam Seal is applied to the inside of a stitched seam in waterproof items including waterproof jackets & tents. Seam tape is heat activated with adhesive on one side and a waterproof membrane on the other creating a sealed seam. 

*This tape does not come with packaging or written instructions.

Ideal for repairing: 

  • The inside of waterproofs

How to use:

  • Lay your item inside out and flat so you can see the line of stitching you want to seal.

  • Cut the tape to the length you need and round the corners.

  • Place the tape along the stitching you want to seam seal with the lighter slightly shiner side down.

  • Put a non-textured tea towel or baking paper over the tape.

  • Set your iron to the lowest heat setting. 

  • Press the iron onto the tape for 2–3 seconds, then lift it and check the area.

  • Continue heating the tape for 3 seconds checking each time for a slightly shiny edge around the tape. This means the glue has melted and the tape is stuck down properly.

  • If the glue isn’t melting, gradually increase the temperature of the iron until it does.

Continue along the tape in short sections with the same methods. 

See our full guide on how to apply seam tape here :)

Size:

Seam Seal is applied to the inside of a stitched seam in waterproof items including waterproof jackets & tents. Seam tape is heat activated with adhesive on one side and a waterproof membrane on the other creating a sealed seam. 

*This tape does not come with packaging or written instructions.

Ideal for repairing: 

  • The inside of waterproofs

How to use:

  • Lay your item inside out and flat so you can see the line of stitching you want to seal.

  • Cut the tape to the length you need and round the corners.

  • Place the tape along the stitching you want to seam seal with the lighter slightly shiner side down.

  • Put a non-textured tea towel or baking paper over the tape.

  • Set your iron to the lowest heat setting. 

  • Press the iron onto the tape for 2–3 seconds, then lift it and check the area.

  • Continue heating the tape for 3 seconds checking each time for a slightly shiny edge around the tape. This means the glue has melted and the tape is stuck down properly.

  • If the glue isn’t melting, gradually increase the temperature of the iron until it does.

Continue along the tape in short sections with the same methods. 

See our full guide on how to apply seam tape here :)

  • UK SHIPPING ONLY

    Standard shipping is £2.70, takes 2-5 business days from date of shipping. Royal Mail tracked 48 service. We will provide tracking information with every order.

    You can collect from the workshop at no extra cost. Our opening hours are 9-4 Mon-Thurs.

  • We hope you like your purchase, but in the event that you are not happy you can return the item (in the same condition as it was received) within 14 days of receiving your order. Postage costs for returns must be covered by you, and Snowdonia Gear Repair cannot be held liable for any returns that are lost in the post - We recommend using a tracked service to be safe.

    In the unlikely event that your product is damaged in transit, please email us with photos of the issue. In this instance, returns shipping costs will be covered by Snowdonia Gear Repair, as per distance selling regulations.